Gigabyte GA-8N-SLI Pro Manual - Page 43

English IDE Secndry Slave RAID Enabled Enable 2nd slave channel IDE RAID function. Disabled Disable this function. (Default value) SATAII 1 Primary RAID Enabled Enable SATAII 1 1st SATA RAID function.(Default value) Disabled Disable this function. SATAII 1 Secondary RAID Enabled Disabled Enable SATAII 1 2nd SATA RAID function.(Default value) Disable this function. SATAII 2 Primary RAID Enabled Disabled Enable SATAII 2 1st SATA RAID function.(Default value) Disable this function. SATAII 2 Secondary RAID Enabled Enable SATAII 2 2nd SATA RAID function.(Default value) Disabled Disable this function. On-Chip IDE Channel0 Enabled Disabled Enable onboard 1st channel IDE port. (Default value) Disable onboard 1st channel IDE port. On-Chip IDE Channel1 Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. IDE1 Conductor Cable Auto BIOS autodetects IDE1 conductor cable .(Default Value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable are compatible with ATA66/100/133). ATA33 Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) IDE2 Conductor Cable Auto BIOS autodetects IDE2 conductor cable. (Default Value) ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE device and cable are compatible with ATA66/100/133) ATA33 Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) Serial-ATAII 1 (Onboard nVIDIA chipset) Enabled Enable Serial-ATAII 1 support. (Default Value) Disabled Disable Serial-ATAII 1 support. Serial-ATAII 2 (Onboard nVIDIA chipset) Enabled Disabled Enable Serial-ATAII 2 support. (Default Value) Disable Serial-ATAII 2 support. On-Chip USB V1.1+V2.0 Enable USB 1.1 and USB 2.0 controllers. (Default Value) V1.1 Disabled Enable only USB 1.1 controller Disable onchip USB support. - 43 - BIOS Setup