Gigabyte GA-8N-SLI Royal Manual - Page 14
Configuring a bootable RAID array with Microsoft Windows 2000 - driver download
View all Gigabyte GA-8N-SLI Royal manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Ác (6) Configuring a bootable RAID array with Microsoft Windows 2000 Problem: Users cannot install Windows 2000 with Service Pack 2 (or previous versions) to a bootable RAID volume. There are two solutions to resolve this issue. Solutions 1: Use the NVRAID tool (nForce Driver Version 5.xx) to convert the boot volume to a RAID array. Here are the detailed step-by-step instructions: Step 1: Install Windows 2000 onto a selected hard drive. Download and install Windows 2000 Service Pack 4 from Microsoft's website. Step 2: After system restarts, press Del to enter system BIOS Setup during POST (Power-On Self Test). Under the Integrated Peripherals menu (Figure 21) assure the SATA port connecting the SATA hard disk (the one containing the Windows 2000) is Enabled (Figure 21/22). Save settings and exit the BIOS setup. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals IDE/SATAII RAID Config On-Chip IDE Channel0 On-Chip IDE Channel1 IDE1 Conductor Cable IDE2 Conductor Cable Serial-ATAII 1 Serial-ATAII 2 On-Chip USB USB Keyboard Support USB Mouse Support AC97 Audio Onboard LAN2 Function Onboard SATAII/IDE3 Onboard SATAII/IDE3 Mode Onboard 1394b Function Onboard LAN Function Onboard Serial Port 1 i-Lock Onboard Parallel Port Parallel Port Mode [Press Enter] [Enabled] [Enabled] [Auto] [Auto] [Enabled] [Enabled] [V1.1+V2.0] [Disabled] [Disabled] [Auto] [Auto] [E n a b l e d ] [BASE] [Enabled] [Enabled] [3F8/IRQ4] [Enabled] [378/IRQ7] [SPP] Item Help Menu Level} higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F3: Language Defaults F5: Previous Values Figure 21 F6: Fail-Safe Defaults F7: Optimized CMOS Setup Utility-Copyright (C) 1984-2005 Award Software IDE/SATAII RAID Config IDE/SATAII RAID function IDE Primary Master RAID IDE Primary Slave RAID IDE Secndry Master RAID IDE Secndry Slave RAID SATAII 1 Primary RAID SATAII 1 Secondary RAID SATAII 2 Primary RAID SATAII 2 Secondary RAID [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] Item Help Menu Level} higf: Move Enter: Select +/-/PU/PD: Value F10: Save F3: Language F5: Previous Values F6: Fail-Safe Defaults Figure22 SATA Configurations (P4 nForce4 SLI series) - 14 - ESC: Exit F1: General Help F7: Optimized Defaults