Gigabyte GA-945PL-S3G Manual - Page 44
CPU Clock Ratio, Robust Graphics Booster, O.C. FSB1333 Core.2 CPU
View all Gigabyte GA-945PL-S3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2-9 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2007 Award Software MB Intelligent Tweaker(M.I.T.) CPU Clock Ratio (Note) Robust Graphics Booster O.C. FSB1333 Core.2 CPU CPU Host Clock Control x CPU Host Frequency (Mhz) PCI Express Frequency (Mhz) System Memory Multiplier Memory Frequency (Mhz) DIMM OverVoltage Control PCI-E OverVoltage Control FSB OverVoltage Control CPU Voltage Control Normal CPU Vcore [22X] [Auto] [Auto] [Disabled] 133 [Auto] [Auto] 533 [Normal] [Normal] [Normal] [Normal] 1.38750V Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) CPU Clock Ratio (Note) Allows you to alter the clock ratio for the installed CPU. The item is present only if a CPU with unlocked clock ratio is installed. Robust Graphics Booster Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory. Auto allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options are: Auto (default), Fast, Turbo. O.C. FSB1333 Core.2 CPU Allows you to decide whether to enable the use of a CoreTM 2 CPU with 1333 MHz FSB through overclocking. Note: You must install the FSB 1333 MHz CoreTM 2 CPU with DDR2 533 (or above) memory module(s). Auto Sets this item to Auto, then save the changes and restart your computer. During the POST, a message will appear asking if you want to enable the use of a FSB 1333 CoreTM 2 processor through overclocking. Press to confirm Disabled or to reject. Or press any key to continue the POST. (Default) Disables this function. Enabled Enables this function. (Note) This item appears only if you install a CPU that supports this feature. GA-945PL-S3G Motherboard - 44 -