Gigabyte GA-970-Gaming Manual - Page 29

SATA Hot Plug on PORT0~SATA Hot Plug on PORT5, SATA Power on PORT0~SATA Power on PORT5

Page 29 highlights

&& HD Audio Azalia Device Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && USB DAC Power Enables or disables the power for the USB DAC connector on the back panel. For a USB DAC that has independent power, set this item to Disabled. (Default: Enabled) && Onboard USB Device Enables or disables the integrated USB controller. (Default: Enabled) && Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. && Onboard USB3.0 Controller (VIA® VL805 USB Controller) Enables or disables the VIA® VL805 USB controller. (Default: Enabled) && Onboard USB3.1 Controller (ASMedia® USB 3.1 Controller) Enables or disables the ASMedia® USB 3.1 controllers. (Default: Enabled) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. && IOMMU Controller Enables or disables AMD IOMMU support. (Default: Disabled) `` SB SATA Configuration && SATA Hot Plug on PORT0~SATA Hot Plug on PORT5 Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && SATA Power on PORT0~SATA Power on PORT5 Enables or disables each SATA port. (Default: Enabled) `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) `` NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. - 29 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

&
HD Audio Azalia Device
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled
.
&
USB DAC Power
Enables or disables the power for the USB DAC connector on the back panel. For a USB DAC that has
independent power, set this item to
Disabled
. (Default: Enabled)
&
Onboard USB Device
Enables or disables the integrated USB controller. (Default: Enabled)
&
Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled
.
&
Onboard USB3.0 Controller (VIA
®
VL805 USB Controller)
Enables or disables the VIA
®
VL805 USB controller. (Default: Enabled)
&
Onboard USB3.1 Controller (ASMedia
®
USB 3.1 Controller)
Enables or disables the ASMedia
®
USB 3.1 controllers. (Default: Enabled)
&
Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&
XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
&
EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
&
Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
&
USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
&
IOMMU Controller
Enables or disables AMD IOMMU support. (Default: Disabled)
`
SB SATA Configuration
&
SATA Hot Plug on PORT0~SATA Hot Plug on PORT5
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
SATA Power on PORT0~SATA Power on PORT5
Enables or disables each SATA port. (Default: Enabled)
`
Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port.
&
Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
`
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
- 29 -