Gigabyte GA-970A-DS3P Manual - Page 24

2-5 Peripherals && OnChip SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the AMD Chipset or configures the SATA controllers to AHCI mode. Native IDE Configures the SATA controller to IDE mode. (Default) RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. && OnChip SATA Port4/5 Type (SATA3 4/SATA3 5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3 4~SATA3 5 and eSATA connectors. IDE Disables RAID for the SATA controller and configures the SATA controller to IDE mode. (Default) As SATA Type The mode depends on the OnChip SATA Type settings. && HD Audio Azalia Device Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && Onboard USB Device Enables or disables the integrated USB controller. (Default: Enabled) && R_USB3.0 Controller (VIA® VL805 USB Controller) Enables or disables the VIA® VL805 USB controller. (Default: Enabled) && Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. - 24 -