Gigabyte GA-9ITDW Raid Configuration Guide - Page 17
RAID driver installation
 |
View all Gigabyte GA-9ITDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
All data will be overwritten on the new drive from the existing array drive in a while. After finished the rebuilding, please restart system again. 2. RAID driver installation A system with Adaptec 7902W SCSI RAID driver installed needs have an appropriate driver for the RAID controller to operate properly. If you would like add RAID driver to an existing system, the driver may be direct installed from the CD, whereas install the RAID driver in new system usually will require a driver disk, please extract RAID driver into floppy disk form CD or GIGABYTE web site. 17
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23
-
24
 |
 |
17
All data will be overwritten on the new drive from the existing array drive in
a while.
After finished the rebuilding, please restart system again.
2.
RAID driver installation
A system with Adaptec 7902W SCSI RAID driver installed needs have an
appropriate driver for the RAID controller to operate properly.
If you would like add RAID driver to an existing system, the driver may be direct
installed from the CD, whereas install the RAID driver in new system usually will
require a driver disk, please extract RAID driver into floppy disk form CD or
GIGABYTE web site.