Gigabyte GA-B250M-DS3H Users Manual - Page 7

USB Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor BIOS ŠŠ Chipset: - 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) - 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) ŠŠ 1 x 24-pin ATX main power connector ŠŠ 1 x 8-pin ATX 12V power connector ŠŠ 1 x M.2 Socket 3 connector ŠŠ 6 x SATA 6Gb/s connectors ŠŠ 1 x CPU fan header ŠŠ 1 x system fan header ŠŠ 1 x front panel header ŠŠ 1 x front panel audio header ŠŠ 1 x S/PDIF Out header ŠŠ 1 x USB 3.1 Gen 1 header ŠŠ 2 x USB 2.0/1.1 headers ŠŠ 1 x Trusted Platform Module (TPM) header ŠŠ 1 x serial port header ŠŠ 1 x parallel port header ŠŠ 1 x Clear CMOS jumper ŠŠ 1 x PS/2 keyboard/mouse port ŠŠ 1 x D-Sub port ŠŠ 1 x DVI-D port ŠŠ 1 x HDMI port ŠŠ 4 x USB 3.1 Gen 1 ports ŠŠ 2 x USB 2.0/1.1 ports ŠŠ 1 x RJ-45 port ŠŠ 3 x audio jacks (Line In, Line Out, Mic In) ŠŠ iTE® I/O Controller Chip ŠŠ Voltage detection ŠŠ Temperature detection ŠŠ Fan speed detection ŠŠ Overheating warning ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan speed control function is supported will depend on the fan you install. ŠŠ 2 x 64 Mbit flash ŠŠ Use of licensed AMI UEFI BIOS ŠŠ Support for DualBIOS™ ŠŠ PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 - 7 -