Gigabyte GA-EP45-DQ6 Manual - Page 54
Onboard LAN1/LAN2/LAN3/LAN4 Boot ROM, Onboard SATA/IDE Device GIGABYTE SATA2 Chip, Smart Backup
UPC - 818313005786
View all Gigabyte GA-EP45-DQ6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Onboard LAN1/LAN2/LAN3/LAN4 Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) Onboard SATA/IDE Device (GIGABYTE SATA2 Chip) Enables or disables the IDE and SATA controllers integrated in the GIGABYTE SATA 2 chip. When this item is set to Disabled, the Smart Backup Function and Smart Backup Initial items will become unavailable. (Default: Enabled) Smart Backup Function Enables or disables the Smart Backup function. Disabled Disables this function. (Default) GS0/GS1 Ports Enables Smart Backup for the GS0-Source/GS1 connector. GS2/GS3 Ports Enables Smart Backup for the GS2-Source/GS3 connector. All Ports Enables Smart Backup for the GS0-Source/GS1 and GS2-Source/GS3 connectors. Smart Backup Initial To change hard drives connected to the GS0-Source and GS1 connectors at the same time, set this item to Enabled . (Note) (When Smart Backup is enabled, this item will be automatically set to Enabled. It will revert back to Disabled after the system restarts.) (Default: Disabled) Onboard Serial Port 1 Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled. (Note) When this item is enabled and the system is restarted, a message will appear which says "Initializing storage policy, please wait..." during the POST. After the initialization, the system will restart automatically and display a message which says " Wait Smart Backup Hard Drives Ready (ESC to skip)..." while waiting for hard drive access. This is a normal process. GA-EP45-DQ6 Motherboard - 54 -