Gigabyte GA-EP45-UD3L Manual - Page 90
B. Installing Windows Vista
UPC - 818313006998
View all Gigabyte GA-EP45-UD3L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears, select Load Driver. (Figure 6). Figure 6 Step 2: Specify the location where the driver is saved, such as your floppy disk or USB flash drive (Figure 7). Figure 7 GA-EP45-UD3LR/UD3L Motherboard - 90 -
GA-EP45-UD3LR/UD3L Motherboard
- 90 -
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select
Load Driver
. (Figure 6).
Step 2:
Specify the location where the driver is saved, such as your floppy disk or USB flash drive (Figure 7).
Figure 7
Figure 6