Gigabyte GA-EQ45M-S2 Manual - Page 83
B. Installing Windows Vista
View all Gigabyte GA-EQ45M-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears, select Load Driver. (Figure 3). Figure 3 Step 2: Specify the location where the driver is saved, such as your floppy disk or USB flash drive (Figure 4). For users using a SATA optical drive, be sure to copy the driver files from the motherboard driver disk to a USB flash drive before installing Windows Vista (go to the BootDrv folder and save the whole iMSM foler to the USB flash drive). Then use Method B to load the driver. Method A: Insert the motherboard driver disk into your system and browse to the following directory: \BootDrv\iMSM\32Bit For Windows Vista 64-bit, browse to the 64Bit folder. Method B: Insert the USB flash drive containing the driver files and browse to the 32Bit (for Windows Vista 32-bit) or 64Bit (for Windows Vista 64-bit) folder. Figure 4 - 83 - Appendix