Gigabyte GA-F2A68HM-S1 User Manual - Page 27
GFX Configuration, OnChip SATA Channel, OnChip SATA Type, PORT0 Hot Plug~PORT3 Hot Plug - video driver
View all Gigabyte GA-F2A68HM-S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
`` GFX Configuration && Primary Video Device Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGD Video Sets the onboard graphics as the first display. NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the North Bridge as the first display. (Default) SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the South Bridge as the first display. && Integrated Graphics Enables or disables the onboard graphics function. Auto The BIOS will automatically enable or disable the onboard graphics depending on the graphics card being installed. (Default) Disabled Disables the onboard graphics. Force Always activates the onboard graphics, whether or not a PCI Express card is installed. && UMA Frame Buffer Size This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G. `` SATA Configuration && OnChip SATA Channel Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Native IDE Configures the SATA controller to IDE mode. (Default) RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. && PORT0 Hot Plug~PORT3 Hot Plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && SATA Power on PORT0~SATA Power on PORT3 Enables or disables each SATA port. (Default: Enabled) - 27 -