Gigabyte GA-F2A78M-D3H User Manual - Page 50
SATA Configuration, Super IO Configuration, SATA Hot Plug on PORT0~SATA Hot Plug on PORT5
![]() |
View all Gigabyte GA-F2A78M-D3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
`` SATA Configuration && OnChip SATA Channel Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Native IDE Configures the SATA controller to IDE mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && OnChip SATA Port4-5 Type (SATA3 4~SATA3 5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3 4~SATA3 5 connectors. As SATA Type The mode depends on the OnChip SATA Type settings. (Default) IDE Disables RAID for the SATA controller and configures the SATA controller to IDE mode. && SATA Hot Plug on PORT0~SATA Hot Plug on PORT5 Enables or disable the hot plug capability for each SATA port. (Default: Disabled) && SATA Power on PORT0~SATA Power on PORT5 Enables or disables each SATA port. (Default: Enabled) `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. && Serial Port A Enables or disables the onboard serial port. (Default: Enabled) BIOS Setup - 50 -
![](/manual_guide/products/gigabyte-gaf2a78md3h-user-manual-b047eb7/50.png)