Gigabyte GA-G31M-S2C Manual - Page 41
Init Display First, Onboard VGA, On-Chip Frame Buffer Size
View all Gigabyte GA-G31M-S2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard VGA. PCI Sets the PCI graphics card as the first display. (Default) Onboard Sets the onboard VGA as the first display. PEG Sets PCI Express graphics card as the first display. Onboard VGA Enables or disables the onboard VGA function. Enable If No Ext PEG Activates the onboard VGA only if no PCI Express VGA card is installed. (Default) Always Enable Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. On-Chip Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: 8MB+1~2MB for GTT (default), 1MB+1~2MB for GTT. - 41 - BIOS Setup