Gigabyte GA-H61M-S1 Manual - Page 15
CPU_FAN/SYS_FAN Fan Headers, SATA2 0/1/2/3 SATA 3Gb/s Connectors - drive
View all Gigabyte GA-H61M-S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3/4) CPU_FAN/SYS_FAN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin system fan header (SYS_FAN). Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. 1 CPU_FAN 1 SYS_FAN CPU_FAN/SYS_FAN: Pin No. Definition 1 GND 2 +12V 3 Sense 4 Speed Control DEBUGDEBUG PORT PORT •• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang. DEBUGDEBUG •• These fan headers are not configuration jumper blocks. Do not place a jumper cap on thPeOhReTaPdeOrRsT. 5) SATA2 0/1/2/3 (SATA 3Gb/s Connectors) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. SATA2 77 10 32 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND 11 - 15 - Please connect the L-shaped end of the SATA cable to your SATA hard drive.