Gigabyte GA-H67MA-USB3-B3 Manual - Page 28
TPM Trusted Platform Module Header, CLR_CMOS Clearing CMOS Jumper, ing the CMOS values.
UPC - 818313012739
View all Gigabyte GA-H67MA-USB3-B3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TPM w/housing 13) TPM (Trusted Platform Module Header) You may connect a TPM (Trusted Platform Module) to this header. Pin No. Definition 20 19 1 LCLK 2 GND 3 LFRAME 4 No Pin 5 LRESET 6 VCC5 2 1 7 LAD3 8 LAD2 9 VCC3 10 LAD1 Pin No. 11 12 13 14 15 16 17 18 19 20 Definition LAD0 GND RSV0 RSV1 SB3V SERIRQ GND CLKRUN LPCPD RSV2 14) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values •• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. •• After clearing the CMOS values and before turning on your computer, be sure to remove the jumper cap from the jumper. Failure to do so may cause damage to the motherboard. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). Hardware Installation - 28 -