Gigabyte GA-J1900N-D2H User Manual - Page 7

Product Specifications - drivers

Page 7 highlights

1-2 Product Specifications CPU Memory Onboard Graphics Audio ŠŠ Built in with an Intel® Dual-Core Celeron® J1800 SoC (2.41 GHz)j ŠŠ Built in with an Intel® Quad-Core Celeron® J1900 SoC (2.0 GHz)k * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. ŠŠ 1 MB Cachej ŠŠ 2 MB Cachek ŠŠ 2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory * If only one DDR3L memory module is to be installed, be sure to install it in the SODIMM_1 socket. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3L 1333 MHz memory modules ŠŠ Support for non-ECC memory modules ŠŠ Integrated in the SoC: - 1 x D-Sub port, supporting a maximum resolution of 2560x1600 - 1 x HDMI port, supporting a maximum resolution of 1920x1080 ŠŠ Realtek® ALC887 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. ŠŠ Support for S/PDIF Out LAN ŠŠ Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ŠŠ ŠŠ Storage Interface ŠŠ USB ŠŠ ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ 1 x PCI Express x1 slot 1 x Mini PCI Express x1 slot * This socket does not support USB Bluetooth signals. (The PCI Express x1 slots conform to PCI Express 2.0 standard.) SoC: - 2 x SATA 3Gb/s connectors SoC: - 1 x USB 3.0/2.0 port on the back panel SoC + GL850S USB 2.0 Hub: - 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header) 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 3Gb/s connectors 1 x USB 2.0/1.1 header 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x serial port header 1 x parallel port header 1 x S/PDIF Out header MM Only for GA-J1800N-D2H. NN Only for GA-J1900N-D2H. - 7 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

- 7 -
1-2
Product Specifications
CPU
²
Built in with an Intel
®
Dual-Core Celeron
®
J1800 SoC (2.41 GHz)
j
²
Built in with an Intel
®
Quad-Core Celeron
®
J1900 SoC (2.0 GHz)
k
*
Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
²
1 MB Cache
j
²
2 MB Cache
k
Memory
²
2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory
*
If only one DDR3L memory module is to be installed, be sure to install it in the
SODIMM_1 socket.
²
Dual channel memory architecture
²
Support for DDR3L 1333 MHz memory modules
²
Support for non-ECC memory modules
Onboard
Graphics
²
Integrated in the SoC:
-
1 x D-Sub port, supporting a maximum resolution of 2560x1600
-
1 x HDMI port, supporting a maximum resolution of 1920x1080
Audio
²
Realtek
®
ALC887 codec
²
High Definition Audio
²
2/4/5.1/7.1-channel
*
To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
²
Support for S/PDIF Out
LAN
²
Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
²
1 x PCI Express x1 slot
²
1 x Mini PCI Express x1 slot
*
This socket does not support USB Bluetooth signals.
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
Storage Interface
²
SoC:
-
2 x SATA 3Gb/s connectors
USB
²
SoC:
-
1 x USB 3.0/2.0 port on the back panel
²
SoC + GL850S USB 2.0 Hub:
-
6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
²
1 x 24-pin ATX main power connector
²
1 x 4-pin ATX 12V power connector
²
2 x SATA 3Gb/s connectors
²
1 x USB 2.0/1.1 header
²
1 x CPU fan header
²
1 x system fan header
²
1 x front panel header
²
1 x front panel audio header
²
1 x serial port header
²
1 x parallel port header
²
1 x S/PDIF Out header
j
Only for GA-J1800N-D2H.
k
Only for GA-J1900N-D2H.