Gigabyte GA-K8N Pro Manual - Page 25
Drive Assignment, Define, RAID Menu, Define RAID Menu
View all Gigabyte GA-K8N Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
GigaRAID (IT8212) ATA RAID Controller USER'S MANUAL RAID 0+1 is implemented as a mirrored array whose segments are RAID 0 arrays. SPAN (JBOD): There isn't any specific limitation. Normal: If a hard drive is not included in an array (Column "Assignment" in the View Drive Assignment is shown "Free"), this hard drive is regarded as a normal drive. The existence of the normal hard drive sometimes will influence the array number user specified. If the Pri/D0, Pri/D1, Sec/D0 or Sec/D1 hard drive is a normal drive, array 0, 1, 2 or 3 cannot have the array setting respectively. However, you do not have to concern about this limitation. If Setup Utility finds any conflicts, Array No will be adjusted automatically. After finishing setting the array, go back to the Define RAID Menu on page 22 then you will find the Array No is changed. This is because the existence of the normal hard drive(s) causes the Array No to be adjusted automatically. When you press "Ctrl-Y" keys to save your change and your settings checked by Setup Utility are correct, the following window will appear. You can choose to clear the boot sector for the newly created array or not. If your RAID Mode is neither Mirror nor Stripe + Mirror, this array setting is finished then you can click the "Esc" key to go back to the Define RAID Menu on page 22. 25