Gigabyte GA-K8N51GMF-9 User Manual - Page 37

English SATA-II 2 Primary RAID Enabled Enable SATAII 2 1st SATA RAID function. Disabled Disable this function. (Default value) SATA-II 2 Secondary RAID Enabled Enable SATAII 2 2nd SATA RAID function. Disabled Disable this function. (Default value) On-Chip IDE Channel0 Enabled Disabled Enable onboard 1st channel IDE port. (Default value) Disable onboard 1st channel IDE port. On-Chip IDE Channel1 Enabled Disabled Enable onboard 2nd channel IDE port. (Default value) Disable onboard 2nd channel IDE port. IDE1 Conductor Cable Auto BIOS autodetects IDE1 conductor cable. (Default Value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable are compatible with ATA66/100/133). ATA33 Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) IDE2 Conductor Cable Auto BIOS autodetects IDE2 conductor cable. (Default Value) ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE ATA33 device and cable are compatible with ATA66/100/133) Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) Serial-ATA-II 1 Enabled Enable Serial-ATAII 1 support. (Default Value) Disabled Disable Serial-ATAII 1 support. Serial-ATA-II 2 Enabled Enable Serial-ATAII 2 support. (Default Value) Disabled Disable Serial-ATAII 2 support. On-Chip USB V1.1+V2.0 Enable USB 1.1 and USB 2.0 controllers. (Default Value) V1.1 Disabled Enable only USB 1.1 controller Disable onchip USB support. USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Onboard Audio Function Auto Disabled Auto-detect onboard audio function. (Default value) Disable this function. - 37 - BIOS Setup