Gigabyte GA-M55SLI-S4 Manual - Page 45

English Onboard 1394 Function Enabled Enable onboard IEEE 1394 function. (Default value) Disabled Disable onboard IEEE 1394 function. Onboard Serial Port 1 Auto BIOS will automatically setup the Serial port 1 address. 3F8/IRQ4 2F8/IRQ3 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. Onboard Parallel Port Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 3BC/IRQ7 Enable onboard LPT port and address is 278/IRQ5. Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Using Parallel port as Standard Parallel Port. (Default value) EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP and EPP mode. ECP Mode Use DMA This item will be available when "Parallel Port Mode" set to "ECP" or "ECP+EPP". 3 Set ECP Mode Use DMA to 3. (Default value) 1 Set ECP Mode Use DMA to 1. On-Chip USB Disabled V1.1+V2.0 Disable this function if you are not using onboard USB function. Enable USB 1.1 and USB 2.0 controller. (Default value) V1.1 Enable only USB 1.1 controller. Legacy USB Keyboard/Storage Enabled Disabled Enable USB keyboard support in the MS-DOS environment. Disable this function. (Default value) Legacy (DOS) USB Mouse Enabled Disabled Enable USB mouse support in the MS-DOS environment. Disable this function. (Default value) Legacy USB Storage detect This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST. Enabled BIOS will scan all USB storage devices. (Default value) Disabled Disable this function. - 45 - BIOS Setup