Gigabyte GA-M61SME-S2 Manual - Page 68
/ 6- / 8- Channel Audio Introduction - audio drivers
UPC - 818313003409
View all Gigabyte GA-M61SME-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4-1-5 2- / 4- / 6- / 8- Channel Audio Introduction This motherboard comes with three audio jacks. To set up multichannel surround sound, install an additional 5.1/7.1 surround cable (optional) and enable the feature through the audio driver. Installing the 5.1/7.1 Surround Cable (Optional) The 5.1/7.1 Surround Cable provides center/ subwoofer speaker out, rear speaker out, and side speaker out audio jacks. To set up multi-channel surround sound, this cable needs to be installed. Step: 1. Connect the 5.1/7.1 surround cable connector to the HDA_SUR header on the motherboard. 2. Secure the cable's metal bracket to the chassis back panel with a screw. Audio Jacks Introduction The optional 5.1/7.1 surround cable adds additional 3 audio jacks to the 3 onboard audio jacks. The picture to the right shows the default speaker settings for the 6 audio jacks. The jack retasking capability of HD Audio allows users to change the function for each jack through the audio driver. For example, if a rear speaker is plugged into the center/subwoofer speaker out jack, you can reconfigure the center/subwoofer speaker out jack to function as a rear speaker out jack. Line In Line Out (Front Speaker Out) Mic In Center/Subwoofer Speaker Out Rear Speaker Out Side Speaker Out Onboard Audio Audio Jacks on 5.1/7.1 Jacks Surround Cable For the microphone to work correctly, you MUST connect it to either the default Mic In jack or the Line In jack and configure it in the audio driver. GA-M61SME-S2 Motherboard - 68 -