Gigabyte GA-M68M-S2P Manual - Page 39
Away Mode, Backup BIOS Image to HDD, Init Display First, Frame Buffer Size, Onboard GPU - windows 8
UPC - 818313009548
View all Gigabyte GA-M68M-S2P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Away Mode Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the system to silently perform unattended tasks while in a low-power mode that appears off. (Default: Disabled) Backup BIOS Image to HDD Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will be recovered from this image file. (Default: Disabled) Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard VGA. PCI Slot Sets the PCI graphics card as the first display. Onboard VGA Sets the onboard graphics as the first display. PEG Sets the PCI Express graphics card as the first display. (Default) Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Disabled, 32MB, 64MB (Default), 128MB, 256MB. Onboard GPU Enables or disables the onboard graphics function. Enable If No Ext PEG Activates the onboard VGA only if no PCI Express VGA card is installed. (Default) Always Enable Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. - 39 - BIOS Setup