Gigabyte GA-MA69GM-S2H Manual - Page 90
Installing the TV Out Bracket
View all Gigabyte GA-MA69GM-S2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
English 5-3 Installing the TV Out Bracket A TV output header is available on the motherboard (refer to page 28). Via the use of the TV out bracket, you can connect a TV to your computer for output of video signals. • Turn off your system and the power switch on the power supply before installing or removing the TV out bracket to prevent damage to hardware. • Securely insert the cable from the TV out bracket into the corresponding motherboard connector (TV) when installing. • Simultaneous output for D-Sub and TV (S-Video, AV composite, or YPbPr component) is not supported. By default, when the onboard D-Sub and TV are connected at the same time, the D-Sub monitor will be the primary display. To change the primary display to your TV, refer to the instructions on the next page. TV Out Bracket S-Video Y Pr Pb/AV (HDTV Component or AV Composite) Connects to the TV output connector A. Installing the TV out bracket: Step 1: Secure the TV out bracket to the chassis back panel with a screw. Step 2: Connect TV out bracket connector to the motherboard TV output header. Step 3: Refer to the figures below to connect your video device to the corresponding ports on the TV out bracket. S-Video Output Y Pr or NTSC / PAL TV Projector HDTV GA-MA69GM-S2H Motherboard Pb/AV Output (Note) or NTSC / PAL TV Projector (Note) Simultaneous output for S-Video, AV composite, and YPbPr component is not supported. - 90 -