Gigabyte GA-MA74GMT-S2 Manual - Page 80
Rebuilding an Array
View all Gigabyte GA-MA74GMT-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Rebuilding an Array: Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1 or RAID 10 arrays. To replace the old drive, make sure to use a new drive of equal or greater capacity. The procedures below assume a new drive is added to replace a failed drive to rebuild a RAID 1 array. While in the operating system, make sure the chipset drivers and ATi RAID Utility have been installed from the motherboard driver disk. Then launch the AMD RAIDXpert from All Programs in the Start Menu. Step 1: Enter the login ID and password (default: "admin"), and then click Sign in to launch AMD RAIDXpert. Step 2: Select the RAID array to be rebuilt under Logical Drive View and click the Rebuild tab in the Logical Drive Information pane. Step 3: Select one available drive and click Start Now to start the rebuilding process. Step 4: The rebuilding progress is displayed on the screen and you can select Pause/Resume/ Abort/Restart during the rebuilding process. Appendix Step 5: When done, the array's status on the Information page in the Logical Drive Information pane will display as Functional. - 80 -