Gigabyte GA-MA790FX-UD5P Manual - Page 50
Onboard SATA/IDE Ctrl Mode GIGABYTE SATA2 Chip, GSATA2_0/1 connectors - audio driver
View all Gigabyte GA-MA790FX-UD5P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals OnChip IDE Channel OnChip SATA Type x OnChip SATA Port4/5 Type Onboard SATA/IDE Device Onboard SATA/IDE Ctrl Mode Onboard Audio Function Onboard LAN device Onboard 1394 Function OnChip USB Controller USB EHCI Controller USB Keyboard Support USB Mouse Support Legacy USB storage detect Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA [Enabled] [Native IDE] IDE [Enabled] [IDE] [Enabled] [Press Enter] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults OnChip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) OnChip SATA Type (AMD SB750 South Bridge, SATA2_0~SATA2_3 connectors) Configures the operating mode of the integrated SATA2_0~SATA2_3 controller. Native IDE Allows the SATA controller to operate in Native IDE mode. (Default) Enable Native IDE mode if you wish to install operating systems that support Native mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. OnChip SATA Port4/5 Type (SATA2_4/SATA2_5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA2_4/SATA2_5 connectors. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) As SATA Type The mode depends on the OnChip SATA Type settings. Onboard SATA/IDE Device (GIGABYTE SATA2 Chip, GSATA2_0/1 connectors) Enables or disables the SATA controller integrated in the GIGABYTE SATA 2 chip. (Default: Enabled) Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip, GSATA2_0/1 connectors) Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA 2 chip or configures the SATA controller to AHCI mode. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) GA-MA790FX-UD5P Motherboard - 50 -