Gigabyte GA-N3050M-D3P User Manual - Page 20

&& Integratrd Graphics Device Enables or disables the onboard graphics function. (Default: Enabled) `` SATA Configuration && SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Interface Speed Allows you to set the operation mode of the SATA ports to Gen 1, Gen 2, or Gen 3. (Default: Gen 3) `` Serial ATA Port 0/1 && Port 0/1 Enables or disables each SATA port. (Default: Enabled) `` SIO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. `` Network Stack Configuration && Network stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && Ipv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled. && Ipv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network stack is enabled. && PXE boot wait time Allows you to set the waiting time for cancelling the PXE boot by pressing the key. This item is configurable only when Network stack is enabled. && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network stack is enabled. `` CSM Configuration && CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enabled Enables UEFI CSM. (Default) Disabled Disables UEFI CSM and supports UEFI BIOS boot process only. && Network Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller. Do not launch Disables option ROM. UEFI Enables UEFI option ROM only. (Default) Legacy Enables legacy option ROM only. This item is configurable only when CSM Support is set to Enabled. - 20 -