Gigabyte GA-P35C-DS3R Manual - Page 89
SATA RAID/AHCI Mode, IntelR, ICH8R/ICH9R SATA RAID Controller, IntelR ICH9 SATA AHCIController
UPC - 818313003386
View all Gigabyte GA-P35C-DS3R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
English Step 3: For Intel ICH9R SATA controllers: When Setup correctly recognizes the Intel ICH9R SATA RAID/AHCI driver in the floppy disk, a controller menu similar to Figure 3 below will appear. Use the arrow keys to select one of the items displayed and press . If you set the SATA RAID/AHCI Mode item in BIOS Setup to RAID mode, select Intel(R) ICH8R/ICH9R SATA RAID Controller. (Select Intel(R) ICH9 SATA AHCIController (Desktop ICH9R) for AHCI mode.) Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Intel(R) ICH9 SATA AHCIController (Desktop ICH9R) Intel(R) 82801HEM SATA RAID Controller (Mobile ICH8M-E) Intel(R) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M) Intel(R) ICH8R/ICH9R SATA RAID Controller ENTER=Select F3=Exit Figure 3 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA RAID/AHCI driver again from the motherboard driver disk. When the screen as shown below appears, press to continue the driver installation from the floppy disk. The driver installation will be finished in about one minute. Windows Setup Setup will load support for the following mass storage device(s): Intel(R) ICH8R/ICH9R SATA RAID Controller * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit Figure 4 - 89 - Appendix