Gigabyte GA-P43-ES3G Manual - Page 46
SATA AHCI Mode Intel ICH10 Southbridge, SATA Port0-3 Native Mode, Azalia Codec, Onboard H/W LAN, - f6 ahci
UPC - 818313006929
View all Gigabyte GA-P43-ES3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Integrated Peripherals SATA AHCI Mode SATA Port0-3 Native Mode Azalia Codec Onboard H/W LAN Green LAN ` SMART LAN Onboard LAN Boot ROM Onboard IDE Controller Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode USB 1.0 Controller USB 2.0 Controller USB Keyboard Function USB Mouse Function USB Storage Function [Disabled] [Disabled] [Auto] [Enabled] [Disbabled] [Press Enter] [Disabled] [Enabled] [3F8/IRQ4] [378/IRQ7] [SPP] [Enabled] [Enabled] [Disabled] [Disabled] [Enabled] Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Default ESC: Exit F1: General Help F7: Optimized Defaults SATA AHCI Mode (Intel ICH10 Southbridge) Configures the SATA controllers integrated in the Intel ICH10 Southbridge to AHCI mode. Disabled Disables AHCI for the SATAcontrollers and configures the SATA controllers to PATA mode. (Default) AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. SATA Port0-3 Native Mode Specifies the operating mode of the integrated SA TA controllers. Disabled Allows the SATA controllers to operate in Legacy IDE mode. In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with other device. Set this option to Disabled if you wish to install operating systems that do not support Native mode. (Default) Enabled Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode if you wish to install operating systems that support Native mode. Azalia Codec Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. Onboard H/W LAN Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. Green LAN When the onboard LAN function and Green LAN are enabed, the system will dynamically detects if LAN cable(s) is connected or not. If not, the corresponding LAN controller will be disabled automatically. (Default: Disabled) GA-P43-ES3G Motherboard - 46 -