Gigabyte GA-VT890P Manual - Page 37
On-Chip IDE Channel0
View all Gigabyte GA-VT890P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
English 2-5 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Integrated Peripherals SATA Controller SATA Controller Mode IDE DMA transfer access OnChip IDE Channel0 OnChip IDE Channel1 IDE Prefetch Mode Azalia HDA Controller LAN Controller USB 1.1 Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support Onboard LAN Boot ROM Legacy USB storage detect Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode x EPP Mode Select [Enabled] [IDE] [Enabled] [Enabled] [Enabled] [Enabled] [Auto] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [Enabled] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] EPP1.7 Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SATA Controller Enables or disables the integrated SATA controller. (Default: Enabled) SATA Controller Mode Enables or disables RAID for the SATA controller integrated in the VIA 8237S Southbridge. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) RAID Enables RAID for the SATA controller. IDE DMA transfer access Enables or disables DMA (Direct Memory Access) mode for the IDE device(s). Disabled turns off DMA mode for the IDE device(s) and lets it operate in PIO (Programmed Input/Output) mode. (Default: Enabled) On-Chip IDE Channel0 Enables or disables the first integrated IDE controller. (Default: Enabled) On-Chip IDE Channel1 Enables or disables the second integrated IDE controller. (Default: Enabled) IDE Prefetch Mode Enables or disbales prefetch mode for the integrated IDE controller. Enabled activates the IDE prefetch buffer to enhance hard drive performance. (Default: Enabled) Azalia HDA Controller Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. - 37 - BIOS Setup