Gigabyte GA-X38-DS4 Manual - Page 85
B. Installing Windows Vista
View all Gigabyte GA-X38-DS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears, select Load Driver. (Figure 6). Figure 6 Step 2: Specify the location where the driver is saved, such as your floppy disk (Figure 7). Figure 7 - 85 - Appendix
Appendix
- 85 -
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select
Load Driver
. (Figure 6).
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 7).
Figure 7
Figure 6