Gigabyte GA-X99-Designare EX User Manual - Page 73
C-3. Configuring Legacy RAID ROM, CSM Support, Enabled, Storage Boot Option Control, Legacy
View all Gigabyte GA-X99-Designare EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
C-3. Configuring Legacy RAID ROM Enter the Intel® legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Step 1: In BIOS Setup, go to BIOS and set CSM Support to Enabled and Storage Boot Option Control to Legacy Only. Save the changes and exit BIOS Setup. After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration Utility" (Figure 13). Press + to enter the RAID Configuration Utility. Intel(R) Rapid Storage Technology - Option ROM - 14.8.0.2377 Copyright (C) Intel Corporation. All Rights Reserved. RAID Volumes : None defined. Physical Devices : ID Device Model 1 Hitachi HDS72105 2 Hitachi HDS72105 Serial # JP1532FR3BWV7K JP1532ER046M2K Size 465.7GB 465.7GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk Press to enter Configuration Utility... Figure 13 Step 2: After you press + , the MAIN MENU screen will appear (Figure 14). Create RAID Volume If you want to create a RAID array, select Create RAID Volume in MAIN MENU and press . Intel(R) Rapid Storage Technology - Option ROM - 14.8.0.2377 Copyright (C) Intel Corporation. All Rights Reserved. 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID [ MAIN MENU ] 4. Recovery Volume Options 5. Acceleration Options 6. Exit RAID Volumes : None defined. Physical Deivces : ID Device Model 1 Hitachi HDS72105 2 Hitachi HDS72105 [ DISK/VOLUME INFORMATION ] Serial # JP1532FR3BWV7K JP1532ER046M2K Size 465.7GB 465.7GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk [hi]-Select [ESC]-Exit Figure 14 [ENTER]-Select Menu - 73 - Configuring a RAID Set