Gigabyte GA-X99M-Gaming 5 User Manual - Page 11
x S/PDIF Out header, I/O Controller Chip
View all Gigabyte GA-X99M-Gaming 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface USB Internal Connectors Back Panel Connectors Chipset: - 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only (An operating system installed on the SATA3 0~5 ports cannot be used on the sSATA3 0~3 ports.) Chipset: - 4 x USB 3.0/2.0 ports (available through the internal USB headers) - 10 x USB 2.0/1.1 ports (6 ports on the back panel, 4 ports available through the internal USB headers) Chipset + Renesas® USB 3.0 Hub: - 4 x USB 3.0/2.0 ports on the back panel 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x M.2 Socket 3 connector 1 x SATA Express connector 10 x SATA 6Gb/s connectors 1 x CPU fan header 1 x water cooling fan header (CPU_OPT) 3 x system fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 2 x USB 3.0/2.0 headers 2 x USB 2.0/1.1 headers 1 x Clear CMOS jumper 1 x power button 1 x reset button 1 x Clear CMOS button 1 x audio gain control switch 2 x BIOS switches 1 x PS/2 keyboard port 1 x PS/2 mouse port 4 x USB 3.0/2.0 ports 6 x USB 2.0/1.1 ports 1 x RJ-45 port 1 x optical S/PDIF Out connector 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) 2 x Wi-Fi antenna connector holes I/O Controller iTE® I/O Controller Chip - 11 - Hardware Installation