Gigabyte GA-Z170X-Ultra Gaming User Manual - Page 22
THB_C Thunderbolt, Add-in Card Connector, CLR_CMOS Clear CMOS Jumper, Supports a Thunderbolt
View all Gigabyte GA-Z170X-Ultra Gaming manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
U B_ 18) THB_C (Thunderbolt™ Add-in Card Connector) This connector is for a GIGABYTE Thunderbolt™ add-in card. 1 Supports a Thunderbolt™ add-in card. 19) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values •• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). - 22 - S_ S_
18) THB_C (Thunderbolt
™
Add-in Card Connector)
This connector is for a GIGABYTE Thunderbolt
™
add-in card.
1
Supports a Thunderbolt
™
add-in card.
19) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
•
Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
•
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
Open: Normal
Short: Clear CMOS Values
- 22 -