Gigabyte GA-Z270-Gaming 3 Users Manual - Page 30
Storage Boot Option Control, Other PCI devices, Administrator Password, User Password, Secure Boot
View all Gigabyte GA-Z270-Gaming 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
&& Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller. Do not launch Disables option ROM. Legacy Enables legacy option ROM only. (Default) UEFI Enables UEFI option ROM only. This item is configurable only when CSM Support is set to Enabled. && Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. Do not launch Disables option ROM. Legacy Enables legacy option ROM only. UEFI Enables UEFI option ROM only. (Default) This item is configurable only when CSM Support is set to Enabled. && Administrator Password Allows you to configure an administrator password. Press on this item, type the password, and then press . You will be requested to confirm the password. Type the password again and press . You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings. && User Password Allows you to configure a user password. Press on this item, type the password, and then press . You will be requested to confirm the password. Type the password again and press . You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all. To cancel the password, press on the password item and when requested for the password, enter the correct one first. When prompted for a new password, press without entering any password. Press again when prompted to confirm. NOTE: Before setting the User Password, be sure to set the Administrator Password first. && Secure Boot Allows you to enable or disable Secure Boot and configure related settings. - 30 -