Gigabyte GA-Z270X-DESIGNARE Audio Setup Guide - Page 3

B. Configuring Sound Effect, C. Activating an AC'97 Front Panel Audio Module

Page 3 highlights

Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK. Step 3: On the Speakers screen, click the Speaker Configuration tab. In the Speaker Configuration list, select Stereo, Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to the type of speaker configuration you wish to set up. Then the speaker setup is completed. B. Configuring Sound Effect You may configure an audio environment on the Sound Effects tab. C. Activating an AC'97 Front Panel Audio Module If your chassis provides an AC'97 front panel audio module, to activate the AC'97 functionality, click the Tool icon on the right bottom of the screen. On the Connector Settings dialog box, select the Disable front panel jack detection check box. Click OK to complete. D. Muting the Back Panel Audio (For HD Audio Only) Click Device advanced settings icon on the right bottom of the screen to open the Device advanced settings dialog box. Select the Mute the rear output device, when a front headphone plugged in check box. Click OK to complete. - 3 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

- 3 -
Step 2:
Connect an audio device to an audio jack. The
The
current connected device is
dialog box appears. Select
the device according to the type of device you connect.
Then click
OK
.
Step 3:
On the
Speakers
screen, click the
Speaker Configuration
tab. In the
Speaker Configuration
list, select
Stereo
,
Quadraphonic
,
5.1 Speaker
, or
7.1 Speaker
according
to the type of speaker configuration you wish to set up.
Then the speaker setup is completed.
If your chassis provides an AC'97 front panel audio
module, to activate the AC'97 functionality, click the
Tool icon
on the right bottom of the screen. On the
Connector Settings
dialog box, select the
Disable front
panel jack detection
check box. Click
OK
to complete.
Click
Device advanced settings
icon
on the right
bottom of the screen to open the
Device advanced
settings
dialog box. Select the
Mute the rear output
device, when a front headphone plugged in
check
box. Click
OK
to complete.
B. Configuring Sound Effect
You may configure an audio environment on the
Sound Effects
tab.
C. Activating an AC'97 Front Panel Audio Module
D. Muting the Back Panel Audio (For HD Audio Only)