Gigabyte GA-Z68M-D2H Manual - Page 28
TPM Trusted Platform Module Header, CLR_CMOS Clearing CMOS Jumper, ing the CMOS values.
View all Gigabyte GA-Z68M-D2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 M_SATA DIP 1 23 1 DIP 1 23 1 TPM w/housing Voltage measurement module(X58A-OC) 13) TPM (Trusted Platform Module Header) You may connect a TPM (Trusted Platform Module) to this header. DIP 1 23 PWM Switch (X58A-OC) DIP 1 23 PinPNCIoe.powDeer fcinonitnioenctor (SATA)P(Xin58NAo-O. C)Definition 20 19 1 LCLK 2 GND 11 LAD0 12 GND 3 LFRAME 13 NC 4 No Pin 14 ID 5 LRESET 15 SB3V 6 NC 16 SERIRQ 2 1 7 LAD3 17 GND 8 LAD2 18 NC 9 VCC3 19 NC 10 LAD1 20 SUSCLK 14) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values •• Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. •• After clearing the CMOS values and before turning on your computer, be sure to remove the jumper cap from the jumper. Failure to do so may cause damage to the motherboard. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). Hardware Installation - 28 -