Gigabyte GB-BER5HS-7535 User Manual - Page 31
Installing the LAN/COM/M.2 Kit
 |
View all Gigabyte GB-BER5HS-7535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3-5 Installing the LAN/COM/M.2 Kit This system does not support the installation of both LAN/COM kit and 2.5" HDD; also the M.2 module here cannot be equipped with a thermal plate due to the space limitation. Follow these instructions to remove the WiFi Module: Unscrew and remove the bracket, and then disconnect the SATA cable SATA Install the upgrade kit board onto the bottom panel using the four screws provided, then connect the cable included in the upgrade kit to the upgrade kit board. Connect the other end of the cable to the SATA connector on the motherboard SATA System Hardware Installation 31
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37
-
38
-
39
 |
 |
System Hardware Installation
31
3-5 Installing the LAN/COM/M.2 Kit
Unscrew and remove the bracket, and then disconnect the SATA cable.
SATA
Follow these instructions to remove the WiFi Module:
Install the upgrade kit board onto the bottom panel using the four screws provided, then
connect the cable included in the upgrade kit to the upgrade kit board.
This system does not support the installation of both LAN/COM kit and 2.5" HDD; also the M.2 module
here cannot be equipped with a thermal plate due to the space limitation.
Connect the other end of the cable to the SATA connector on the motherboard.
SATA