Gigabyte GS-R22PE Manual - Page 12
Hardware Installation
View all Gigabyte GS-R22PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Internal Connectors (Back Plane Board) Rear Panel I/O Front Panel LED/Buttons 12 x SATA/SAS 6Gb/s connectors 2 x 7-pin power connectors 2 x 4-pin power connectors (For optional inter HDDs) 1 x SMBus connector 3 x SGPIO connectors 4 x Systen fan connectors 2 x USB 2.0/1.1 ports 4 x RJ-45 ports (GS-R22PE1/GA-7PPSH) 2 x RJ-45 ports (GS-R22PE/GA-7PPSH2) 1 x Server Management LAN port 1 x COM port 1 x VGA port 1 x ID Switch button 1 x Power button/LED 1 x ID button/LED 1 x Reset button 2 x LAN LED 1 x HDD Status LED 1 x System LED BMC Controller ASPEED® AST2300 Hardware Monitor BIOS Environment Ambient Temperature System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. 1 x 64 Mbit flash AMI BIOS Operating Temperature: 5oC to 35oC Non-operating Temperature: 0oC to 40oC Relative Humidity System 10-80% operating Humidity at 30oC 430Wx86.5Hx710D (mm) Dimension Electrical Hot-swap 1+1 Redundant 650W 380VDC at 80 plus platnium (Etasis) Power Supply Hot-swap 1+1 Redundant 650W 100~230VAC at 80 plus gold (Etasis) Hot-swap 1+1 Redundant 750W 100~230VAC at 80 plus gold (Liteon) * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. Hardware Installation - 12 -