Gigabyte GV-N590D5-3GD-B Manual - Page 8
Hardware Installation - vga
View all Gigabyte GV-N590D5-3GD-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2.2. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card. Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. Make sure that the gold edge connector of the graphics card is securely inserted. Step 2. Replace the screw to fasten the card in place, and replace the computer cover. Step 3. This graphics card provides three DVI-I digital connectors and one mini Displayport connector. The GeForce GTX graphics card can be connected to PC monitors and HDTVs that support DVI,VGA,DisplayPorts,and HDMI inputs.A single GeForce GTX590 graphics card can support up to four displays per card in a multi-monitor configuration. The DisplayPort and DVI#3 outputs are not supported in SLI rendering mode.DVI#1 and #2 on each card must be used when SLI is enabled.All output connectors are avoulable in single card configuration. Connect a flat panel To Mini Display Port To Flat Panel Display GV-N500 Series Graphics Accelerator - 8 -