Gigabyte GV-N62-512L Manual - Page 8
To install your new graphics card - driver
UPC - 810154015122
View all Gigabyte GV-N62-512L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
To install your new graphics card: 1. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. To connect a D-Sub monitor to your graphics card, use the D-Sub connector. To connect a flat panel display to your graphics card, use the DVI-I Connect a D-Sub monitor connector. To Flat Panel Display To D-Sub monitor (15-pin) Connect a flat panel display You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. GV-N62-512L Graphics Accelerator - 8 -