Gigabyte GV-N62128DP Manual - Page 7

Plug the display cable into your graphics - driver

Get Gigabyte GV-N62128DP PDF manuals and user guides View all Gigabyte GV-N62128DP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 5. Replace the screw to fasten the card in place, and replace the computer cover. After installation, please connect the power cable to your graphics card, or the system will not boot. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To VGA Monitor To Flat Panel Display To TV or VCR You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. - 7 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Hardware Installation
- 7 -
English
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
4.
Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
After installation, please connect the power cable to your
graphics card, or the system will not boot.
6.
Plug the display cable into your graphics
card; then turn on the computer and
monitor.
To TV or VCR
To VGA Monitor
To Flat Panel Display
5.
Replace the screw to fasten the card in
place, and replace the computer cover.