Gigabyte GV-N62256DP2-RH Manual - Page 19

English nView Display Settings properties „ nView allows you to connect separate displays to single graphics card. • nView Display mode: select your preferred nView display modes here. Options: Single display/ Dualview • Primary/Secondary display: select a single display or display pair. The selected display combination will appear in the graphical representation below. • Make this the primary display: Specifies that the display corresponding to the icon you selected above is the primary display. Display Model GV-N62256DP2-RH Matrix CRT+TV Yes CRT+DVI No DVI+TV Yes • Click Apply to apply settings or click OK to save settings. „ If TV is chosen as the display, you will need to select the proper TV format. To do this, click "Device Setting" followed by "Select TV format". Select the format for your television and then click "Apply" followed by "OK". Dual-Monitor Setup: You can set the display to output from two monitors on the nView Display Settings page. The GV-N62256DP2-RH support the following modes. (1) Clone Mode: Clone mode indicates that both displays in the display pair show images of the same desktop. Select Clone from the nView Display Mode list and click Apply. (2)DualView Mode: Dualview mode indicates that both displays in the display pair function as one virtual desktop. Unlike Horizontal Span or Vertical Span mode, Dualview treats each display as a separate device. This means that the taskbar will not be stretched across displays and 3D applications are not accelerated as efficiently as when the application spans displays. Select DualView from the nView Display Mode list and click Apply. - 19 - Clone Mode DualView Mode Software Installation