Gigabyte GV-N66L128DP Manual - Page 9

English To install your new graphics card: 1. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. After installation, please connect the power cable to your GV-N66L128DP graphics card, or the system will not boot. Please do not touch the graphics card when it is runnnig to avoid the system unstable problems. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV / VCR You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation