Gigabyte GV-N66T128D Manual - Page 12

English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the GPU and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is running. 5. Replace the screw to fasten the card in place, and replace the computer cover. After installation, please connect the power cable to your graphics card, or the system will not boot. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To VGA Monitor To Flat Panel Display To TV or VCR You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. GV-N66T128D/GV-N66T128VP Graphics Accelerator - 8 -