Gigabyte GV-NTITANOC-6GD-B Manual - Page 5
Hardware Installation
![]() |
View all Gigabyte GV-NTITANOC-6GD-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2.1. Hardware Installation Now that you have prepared your computer, you are ready to install your graphics card. Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. Make sure that the gold edge connector of the graphics card is securely inserted. Step 2. Replace the screw to fasten the card in place, and replace the computer cover. Step 3. Connect the appropriate cable to the card and the display. To Flat Panel Display To Flat Panel Display To HDMI Monitor To Mini HDMI Monitor To D-sub Monitor To Mini DisplayPort Monitor To Mini DisplayPort Monitor - 5 - Hardware Installation
![](/manual_guide/products/gigabyte-gvn970ixoc4gd-manual-c5f1250/5.png)
- 5 -
Hardware Installation
2.1. Hardware Installation
Now that you have prepared your computer, you are ready to install your graphics card.
Step 3.
Connect the appropriate cable to the card and the display.
To Flat Panel Display
To Flat Panel Display
To HDMI Monitor
To D-sub Monitor
To Mini HDMI Monitor
To Mini DisplayPort Monitor
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the
metal cover from this slot; then align your graphics card
with the PCI Express x16 slot, and press it in firmly until the
card is fully seated.
Step 2.
Replace the screw to fasten the card in place, and replace
the computer cover.
Make sure that the gold edge connector of the graphics
card is securely inserted.
To Mini DisplayPort Monitor