Gigabyte GV-NX62TC256P8-RH Manual - Page 9
To install your new graphics card - drivers
View all Gigabyte GV-NX62TC256P8-RH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English To install your new graphics card: 1. Locate the PCI Express x 16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x 16 slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To TV / VCR To Flat Panel Display To avoid system instability, do not touch the graphics card when it is runnnig. You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation