Gigabyte GV-NX66256DP2 Manual - Page 9

English Warning! When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the GPU and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is runnnig . The two central heatsink fins on the back of the graphics card can be used to fasten the patented GIGABYTE 3D Plug Cooler (optional device) for heat dissipation for the VGA chipset. Slide the fan arm onto the two central heatsink fins until it fits securely into place. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV/VCR/VIVO You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation