Gigabyte GV-NX66T128DE Manual - Page 12

English Warning! When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the GPU and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is runnnig . 2. Replace the screws to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. The GVNX66T256DP-RH provides two DVI-I connectors, to connect a flat panel directly to your graphics card, use the DVI-I connector. To connect a VGA monitor to the DVI-I connector, plug the DVI-I to D-sub adapter into the DVI-I connector, then plug the monitor cable into the adapter. Connect a VGA monitor To VGA Monitor To Flat Panel Display To TV/VCR Connect a flat panel You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. GV-NX66T Series Graphics Accelerator - 8 -