Gigabyte GV-NX72G512P2 Manual - Page 12
To install your new graphics card - graphics card drivers
UPC - 100000013328
View all Gigabyte GV-NX72G512P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English To install your new graphics card: 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. * Please make sure that the gold edge connectors of the graphics card is securely inserted. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To D-Sub Monitor To TV / VCR To Flat Panel Display To avoid system instability, do not touch the graphics card when it is runnnig. You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. GV-NX72G Series Graphics Accelerator - 8 -