Gigabyte GV-NX76G512P-RH Manual - Page 15

English To install your new graphics card: 1. Locate one PCI Express x16 slot. If necessary, remove the metal cover from the slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. * Please make sure that the gold edge connectors of the graphics card is securely inserted. 2. Replace the screws to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a Dual-Link DVI-I connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display To TV/VCR You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. - 9 - Hardware Installation