Gigabyte GV-R785OC-2GD Manual - Page 4
Hardware Installation
View all Gigabyte GV-R785OC-2GD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2.1. Hardware Installation Step 1. Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated. Make sure that the gold edge connector of the graphics card is securely inserted. Step 2. Replace the screw to fasten the card in place, and replace the computer cover. After installation, remember to connect the power cable to your graphics card, or the system will not boot. Do not touch the card when it's operating to prevent system instability. Step 3. Plug the display cable into your card; then turn on the computer and monitor. To connect a flat panel display to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics card, use the HDMI connector. To connect a DisplayPort monitor to your graphics card, use the DisplayPort connector. To Flat Panel Display To Flat Panel Display To HDMI Monitor To Mini HDMI Monitor To D-Sub Monitor DisplayPort Monitor To Mini DisplayPort Monitor You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions. AMD Series Graphics Accelerator - 4 -